60μm Bright White BOPP Film Detergent & Daily Chemical Bottles Label Material — F15500

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Medium-tack adhesive system — balanced adhesion and converting performance
• Pearl BOPP face — good stiffness, bright appearance, crease resistant

FAQ

F15500 (60μm Bright White BOPP Film): does the Medium-tack adhesive on 60g White Glassine give enough grab at the HDPE and squeezable detergent bottles edge, and what would you send as a sample?

60μm Bright White BOPP Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. Pearl BOPP gives an opaque pearlescent white without a primer. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does F15500 (60μm Bright White BOPP Film) survive 60 °C in service, given the Medium-tack adhesive, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

For F15500 (60μm Bright White BOPP Film), what tack and peel should we expect from Medium-tack adhesive at 23 °C, and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What MOQ applies to F15500 (60μm Bright White BOPP Film) with Medium-tack adhesive, and what is the lead time after approval, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between F15500 (60μm Bright White BOPP Film) and F11801, and can we get both as samples?

F15500 runs Medium-tack adhesive on 60g White Glassine Liner, while F11801 runs General-purpose on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.