60μm Bright White BOPP Film Detergent & Daily Chemical Bottles Label Material — F1CG60

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Pearl BOPP face — good stiffness, bright appearance, crease resistant

FAQ

F1CG60 (60μm Bright White BOPP Film): does the Low-odor / Residue-free adhesive on 62g White Glassine give enough grab at the HDPE and squeezable detergent bottles edge, and does it still hold on our own substrate?

60μm Bright White BOPP Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. Pearl BOPP gives an opaque pearlescent white without a primer. Where the surface is recycled or carries mould release, treat the first roll as a trial.

If our line runs at 60 °C, does F1CG60 (60μm Bright White BOPP Film, Low-odor / Residue-free) need a slower speed to wet out, and does the liner shift it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

For F1CG60 (60μm Bright White BOPP Film), what tack and peel should we expect from Low-odor / Residue-free adhesive at 23 °C, and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What quantity does F1CG60 (60μm Bright White BOPP Film, Low-odor / Residue-free) start at on a 62g White Glassine liner, and does a trial roll count, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick F1CG60 (60μm Bright White BOPP Film) over F11801, and which holds better at the edge?

F1CG60 runs Low-odor / Residue-free adhesive on 62g White Glassine Liner, while F11801 runs General-purpose on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.