50μm Clear BOPP Film Detergent & Daily Chemical Bottles Label Material — F41770

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• PP film face — balanced stiffness and weather resistance

FAQ

We print 50μm Clear BOPP Film on 60g White Glassine — will that hold on HDPE and squeezable detergent bottles, and which document states that?

50μm Clear BOPP Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. BOPP film resists moisture and flexes with a squeezable wall instead of cracking. Not recommended for small diameters, irregular or squeezable bottles.

What is the minimum application temperature for F41770 (50μm Clear BOPP Film, Standard) on a 60g White Glassine liner, and is there a written figure for it?

The minimum application temperature is 10 °C and the service range after labelling is -10–80 °C. Below the minimum the adhesive cannot wet out, and edges lift within hours on a curved wall. Both figures are measured at 23±2 °C / 50±5 % RH, so confirm them with a trial roll on your line.

Can you give tack and peel for F41770 (50μm Clear BOPP Film, Standard) in N rather than a vague high-tack claim, and does the liner change the figure?

Initial tack is ≥8 N by the ball method and 90° peel is ≥5 N/25 mm after 20 min. Both are measured to FINAT FTM 9 and FTM 2 at 23±2 °C / 50±5 % RH. Peel grows with dwell, so compare the same hold time against your own pull test.

If we order F41770 in a slit roll of 50μm Clear BOPP Film, what is the smallest quantity, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick F41770 (50μm Clear BOPP Film) over F41771, and can we get both as samples?

The adhesive is the same and the liner differs: F41770 uses 60g White Glassine Liner, while F41771 uses 62g White Glassine Liner. Changing the liner shifts release force and die-cutting behaviour, and the price moves with it. Compare the two technical tables above, then test both on the same substrate.