50μm Clear BOPP Film (HP Indigo) Digital Inkjet & Laser Label Material — F45510

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Medium-tack adhesive system — balanced adhesion and converting performance
• PP film face — balanced stiffness and weather resistance
• Verified by customer mass production

FAQ

Is 50μm Clear BOPP Film (HP Indigo) the right face for laser and inkjet printed sheets, or do we need a film instead, and does it still hold on our own substrate?

50μm Clear BOPP Film (HP Indigo) is specified for the digital inkjet & laser field, which does not mean every substrate in it. BOPP film resists moisture and flexes with a squeezable wall instead of cracking. Where the surface is recycled or carries mould release, treat the first roll as a trial.

At what temperature do we apply F45510 (50μm Clear BOPP Film (HP Indigo), Medium-tack), and what can it take afterwards, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

For F45510 (50μm Clear BOPP Film (HP Indigo)), what tack and peel should we expect from Medium-tack adhesive at 23 °C, and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What is the smallest order you will accept for F45510 (50μm Clear BOPP Film (HP Indigo), Medium-tack) on 60g White Glassine, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick F45510 (50μm Clear BOPP Film (HP Indigo)) over F41771, and which holds better at the edge?

F45510 runs Medium-tack adhesive on 60g White Glassine Liner, while F41771 runs Standard on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.