75μm Synthetic Paper General Standard Label Material — F75550

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Hot melt adhesive system — good heat resistance for demanding environments
• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

We used a generic 75μm Synthetic Paper before and it lifted — is F75550 any different on general cartons and rigid containers, and which document states that?

75μm Synthetic Paper is specified for the general standard field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

F75550 (75μm Synthetic Paper, Hot Melt) in a 60 °C plant: what application window should we plan for, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

For F75550 (75μm Synthetic Paper), what tack and peel should we expect from Hot Melt adhesive at 23 °C, and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What is the smallest order you will accept for F75550 (75μm Synthetic Paper, Hot Melt) on 60g White Glassine, and can a trial roll count towards it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between F75550 (75μm Synthetic Paper) and F10050, and is one a drop-in for the other?

F75550 runs Hot Melt adhesive on 60g White Glassine Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.