75μm Synthetic Paper General Standard Label Material — F756K1

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

Is Standard adhesive on F756K1 (75μm Synthetic Paper) enough for general cartons and rigid containers, or do we need higher tack, and does the liner change the answer?

75μm Synthetic Paper is specified for the general standard field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does F756K1 (75μm Synthetic Paper) survive 60 °C in service, given the Standard adhesive, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

For F756K1 (75μm Synthetic Paper), what tack and peel should we expect from Standard adhesive at 23 °C, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What MOQ applies to F756K1 (75μm Synthetic Paper) with Standard adhesive, and what is the lead time after approval, and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick F756K1 (75μm Synthetic Paper) over F10050, and does the price differ much?

F756K1 runs Standard adhesive on 120g White CCK Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.