75μm Synthetic Paper HDPE Bottles Label Material — F8W601

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

Can we apply F8W601 (75μm Synthetic Paper, Wash-off) to HDPE bottles and closures straight off the roll, and which document states that?

75μm Synthetic Paper is specified for the hdpe bottles field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

If our line runs at 60 °C, does F8W601 (75μm Synthetic Paper, Wash-off) need a slower speed to wet out, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Can you give tack and peel for F8W601 (75μm Synthetic Paper, Wash-off) in N rather than a vague high-tack claim, and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What is the smallest order you will accept for F8W601 (75μm Synthetic Paper, Wash-off) on 62g White Glassine, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between F8W601 (75μm Synthetic Paper) and F10050, and is one a drop-in for the other?

F8W601 runs Wash-off adhesive on 62g White Glassine Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.