76g Premium Top-coated Thermal Paper Removable & No-Residue Label Material — S2RG30

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Thermal paper face — direct thermal printing, no ribbon required

FAQ

We print 76g Premium Top-coated Thermal Paper on 60g White Glassine — will that hold on glass, furniture and reusable containers, and which document states that?

76g Premium Top-coated Thermal Paper is specified for the removable & no-residue field, which does not mean every substrate in it. Direct thermal prints without a ribbon, but heat, sunlight and plasticiser contact keep developing the coating. Not recommended for curved substrates (strong reaction with removable adhesive); above 70 °C, PMMA/PVC/PET/PP surfaces.

Does the 60g White Glassine liner on S2RG30 (76g Premium Top-coated Thermal Paper, Removable) change how it behaves when applied cold, and how do we verify it on the line?

The minimum application temperature is 10 °C and the service range after labelling is -20–70 °C. Below the minimum the adhesive cannot wet out, and edges lift within hours on a curved wall. Both figures are measured at 23±2 °C / 50±5 % RH, so confirm them with a trial roll on your line.

How much tack does S2RG30 (76g Premium Top-coated Thermal Paper) have with Removable adhesive, measured to which standard, and is that a 20 min or 24 h value?

Initial tack is 4–9 N by the ball method and 90° peel is 1–3.5 N/25 mm after 20 min. Both are measured to FINAT FTM 9 and FTM 2 at 23±2 °C / 50±5 % RH. Peel grows with dwell, so compare the same hold time against your own pull test.

What quantity does S2RG30 (76g Premium Top-coated Thermal Paper, Removable) start at on a 60g White Glassine liner, and does a trial roll count, and can a trial roll count towards it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

We used SR0041 before. What changes if we switch to S2RG30 (76g Premium Top-coated Thermal Paper), and which one should we trial first?

S2RG30 runs Removable adhesive on 60g White Glassine Liner, while SR0041 runs Low-tack Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.