55μm Clear Thermal Film Cold Chain & Fresh Food Label Material — S6CG30

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• Thermal film face — combines print convenience with durability
• Verified by customer mass production

FAQ

Will this 55μm Clear Thermal Film hold on frozen cartons and chilled packs, and where does it stop working, and what would you send as a sample?

55μm Clear Thermal Film is specified for the cold chain & fresh food field, which does not mean every substrate in it. Thermal film puts the heat-sensitive coating on a film base, so it also resists water. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Is there a storage limit on S6CG30 (55μm Clear Thermal Film, Standard) once it sits on a 62g White Glassine liner, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Do the peel figures for S6CG30 (55μm Clear Thermal Film, Standard) change with the 62g White Glassine liner, and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

If we order S6CG30 in a slit roll of 55μm Clear Thermal Film, what is the smallest quantity, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between S6CG30 (55μm Clear Thermal Film) and S9RG31, and is one a drop-in for the other?

S6CG30 runs Standard adhesive on 62g White Glassine Liner, while S9RG31 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.