95μm Thermal Film Cold Chain & Fresh Food Label Material — S8MG31

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Hot melt adhesive system — good heat resistance for demanding environments
• Thermal film face — combines print convenience with durability

FAQ

Will this 95μm Thermal Film hold on frozen cartons and chilled packs, and where does it stop working, and how do we check that before a full run?

95μm Thermal Film is specified for the cold chain & fresh food field, which does not mean every substrate in it. Thermal film puts the heat-sensitive coating on a film base, so it also resists water. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What is the minimum application temperature for S8MG31 (95μm Thermal Film, Hot Melt) on a 62g White Glassine liner, and is there a written figure for it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Where does the S8MG31 (95μm Thermal Film, Hot Melt) data sheet state its peel condition on a 62g White Glassine liner, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

How much S8MG31 (95μm Thermal Film, Hot Melt) on a 62g White Glassine liner do we have to order, and how long does it take, and does a slit roll change it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between S8MG31 (95μm Thermal Film) and S9RG31, and which holds better at the edge?

S8MG31 runs Hot Melt adhesive on 62g White Glassine Liner, while S9RG31 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.