75μm Thermal Film Cold Chain & Fresh Food Label Material — S93301

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Thermal film face — combines print convenience with durability
• Verified by customer mass production

FAQ

We used a generic 75μm Thermal Film before and it lifted — is S93301 any different on frozen cartons and chilled packs, and does the liner change the answer?

75μm Thermal Film is specified for the cold chain & fresh food field, which does not mean every substrate in it. Thermal film puts the heat-sensitive coating on a film base, so it also resists water. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What happens to S93301 (75μm Thermal Film) below -18 °C with this Low-odor / Residue-free adhesive, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What are the initial tack and 90° peel figures for S93301 (75μm Thermal Film, Low-odor / Residue-free), and how do we reproduce the test?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What is the smallest order you will accept for S93301 (75μm Thermal Film, Low-odor / Residue-free) on 62g White Glassine, and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does S93301 (75μm Thermal Film) compare with S9RG31 on frozen cartons and chilled packs, and does the price differ much?

S93301 runs Low-odor / Residue-free adhesive on 62g White Glassine Liner, while S9RG31 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.