75μm Thermal Film Cold Chain & Fresh Food Label Material — S96300

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Thermal film face — combines print convenience with durability

FAQ

Will this 75μm Thermal Film hold on frozen cartons and chilled packs, and where does it stop working, and how do we check that before a full run?

75μm Thermal Film is specified for the cold chain & fresh food field, which does not mean every substrate in it. Thermal film puts the heat-sensitive coating on a film base, so it also resists water. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What happens to S96300 (75μm Thermal Film) below -18 °C with this Freezer-grade adhesive, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Do the peel figures for S96300 (75μm Thermal Film, Freezer-grade) change with the 60g White Glassine liner, and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What is the smallest order you will accept for S96300 (75μm Thermal Film, Freezer-grade) on 60g White Glassine, and can a trial roll count towards it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does S96300 (75μm Thermal Film) compare with S9RG31 on frozen cartons and chilled packs, and which one should we trial first?

S96300 runs Freezer-grade adhesive on 60g White Glassine Liner, while S9RG31 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.