75μm Thermal Film Hot Cups & High-Temperature Label Material — S97151

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• Thermal film face — combines print convenience with durability

FAQ

Will this 75μm Thermal Film hold on paper cups and hot-fill containers, and where does it stop working, and what would you send as a sample?

75μm Thermal Film is specified for the hot cups & high-temperature field, which does not mean every substrate in it. Thermal film puts the heat-sensitive coating on a film base, so it also resists water. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does the 50g White Glassine liner on S97151 (75μm Thermal Film, Standard) change how it behaves when applied cold, and does the liner shift it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Where does the S97151 (75μm Thermal Film, Standard) data sheet state its peel condition on a 50g White Glassine liner, and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Does the 50g White Glassine liner add lead time to a S97151 (75μm Thermal Film, Standard) order, and does a slit roll change it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is S9RG31 a drop-in alternative to S97151 (75μm Thermal Film), and which holds better at the edge?

S97151 runs Standard adhesive on 50g White Glassine Liner, while S9RG31 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.