75μm Thermal Film Detergent & Daily Chemical Bottles Label Material — S9RG31

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Thermal film face — combines print convenience with durability
• Verified by customer mass production

FAQ

Is 75μm Thermal Film the right face for HDPE and squeezable detergent bottles, or do we need a film instead, and what would you send as a sample?

75μm Thermal Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. Thermal film puts the heat-sensitive coating on a film base, so it also resists water. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What is the minimum application temperature for S9RG31 (75μm Thermal Film, Removable) on a 62g White Glassine liner, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What are the initial tack and 90° peel figures for S9RG31 (75μm Thermal Film, Removable), and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

If we order S9RG31 in a slit roll of 75μm Thermal Film, what is the smallest quantity, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does S9RG31 (75μm Thermal Film) compare with S9RG30 on HDPE and squeezable detergent bottles, and which one should we trial first?

The adhesive is the same and the liner differs: S9RG31 uses 62g White Glassine Liner, while S9RG30 uses 60g White Glassine Liner. Changing the liner shifts release force and die-cutting behaviour, and the price moves with it. Compare the two technical tables above, then test both on the same substrate.