80g Electrostatic Copy Paper Office & Stationery Label Material — W2MK10

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Hot melt adhesive system — good heat resistance for demanding environments
• Woodfree paper face — good for writing and printing

FAQ

Is Hot Melt adhesive on W2MK10 (80g Electrostatic Copy Paper) enough for paper, card and file folders, or do we need higher tack, and what would you send as a sample?

80g Electrostatic Copy Paper is specified for the office & stationery field, which does not mean every substrate in it. Uncoated woodfree takes pen and stamp, and it is the least water-resistant face in the range. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does the 80g White CCK liner on W2MK10 (80g Electrostatic Copy Paper, Hot Melt) change how it behaves when applied cold, and does that hold at our line temperature?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Where does the W2MK10 (80g Electrostatic Copy Paper, Hot Melt) data sheet state its peel condition on a 80g White CCK liner, and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What is the smallest order you will accept for W2MK10 (80g Electrostatic Copy Paper, Hot Melt) on 80g White CCK, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick W2MK10 (80g Electrostatic Copy Paper) over W4MG31, and is one a drop-in for the other?

The adhesive is the same and the liner differs: W2MK10 uses 80g White CCK Liner, while W4MG31 uses 62g White Glassine Liner. Changing the liner shifts release force and die-cutting behaviour, and the price moves with it. Compare the two technical tables above, then test both on the same substrate.