80g Coated Paper Industrial Rough Surfaces Label Material — AJ6801

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Hot melt adhesive system — good heat resistance for demanding environments
• Coated paper face — excellent print reproduction for fine graphics

FAQ

What does AJ6801 (80g Coated Paper, Hot Melt) on a 80g White Glassine liner need on rough, dusty or low-energy parts: primer, corona, or nothing, and what would you send as a sample?

80g Coated Paper is specified for the industrial rough surfaces field, which does not mean every substrate in it. Coated paper takes fine print and varnish well, and it takes up moisture at the cut edge. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What is the minimum application temperature for AJ6801 (80g Coated Paper, Hot Melt) on a 80g White Glassine liner, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What are the initial tack and 90° peel figures for AJ6801 (80g Coated Paper, Hot Melt), and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

AJ6801 (80g Coated Paper, Hot Melt): what is the shortest lead time you can hold to, and at what quantity, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does AJ6801 (80g Coated Paper) compare with AR0011 on rough, dusty or low-energy parts, and is one a drop-in for the other?

AJ6801 runs Hot Melt adhesive on 80g White Glassine Liner, while AR0011 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.