80μm Bright White PE Film Detergent & Daily Chemical Bottles Label Material — B87431

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• PE film face — soft and conformable, ideal for squeezable bottles and curved surfaces

FAQ

Does B87431 (80μm Bright White PE Film) with Standard adhesive bond to HDPE and squeezable detergent bottles without a primer, and how do we check that before a full run?

80μm Bright White PE Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. PE film is soft and conforms to squeezable and curved bottles. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Can B87431 (80μm Bright White PE Film, Standard) be applied at 60 °C on the line, and does the liner shift it?

The minimum application temperature is 10 °C and the service range after labelling is -10–80 °C. Below the minimum the adhesive cannot wet out, and edges lift within hours on a curved wall. Both figures are measured at 23±2 °C / 50±5 % RH, so confirm them with a trial roll on your line.

How much tack does B87431 (80μm Bright White PE Film) have with Standard adhesive, measured to which standard, and is that a 20 min or 24 h value?

Initial tack is ≥8 N by the ball method and 90° peel is ≥5 N/25 mm after 20 min. Both are measured to FINAT FTM 9 and FTM 2 at 23±2 °C / 50±5 % RH. Peel grows with dwell, so compare the same hold time against your own pull test.

What quantity does B87431 (80μm Bright White PE Film, Standard) start at on a 62g White Glassine liner, and does a trial roll count, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does B87431 (80μm Bright White PE Film) compare with B373T0 on HDPE and squeezable detergent bottles, and which holds better at the edge?

The adhesive is the same and the liner differs: B87431 uses 62g White Glassine Liner, while B373T0 uses 30μm Clear PET Liner. Changing the liner shifts release force and die-cutting behaviour, and the price moves with it. Compare the two technical tables above, then test both on the same substrate.