60μm Bright White BOPP Film Industrial Rough Surfaces Label Material — F1JG31

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Hot melt adhesive system — good heat resistance for demanding environments
• Pearl BOPP face — good stiffness, bright appearance, crease resistant

FAQ

Is 60μm Bright White BOPP Film the right face for rough, dusty or low-energy parts, or do we need a film instead, and what would you send as a sample?

60μm Bright White BOPP Film is specified for the industrial rough surfaces field, which does not mean every substrate in it. Pearl BOPP gives an opaque pearlescent white without a primer. Where the surface is recycled or carries mould release, treat the first roll as a trial.

How cold can the line run before the Hot Melt adhesive on F1JG31 (60μm Bright White BOPP Film) stops grabbing, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Which standard are the tack and peel values for 60μm Bright White BOPP Film on 62g White Glassine reported to, and does the liner change the figure?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What is the minimum order quantity and lead time for F1JG31 (60μm Bright White BOPP Film, Hot Melt), and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick F1JG31 (60μm Bright White BOPP Film) over F11801, and can we get both as samples?

F1JG31 runs Hot Melt adhesive on 62g White Glassine Liner, while F11801 runs General-purpose on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.