80μm Clear PE Film HDPE Bottles Label Material — F27501

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• General-purpose water-based adhesive, compatible with a wide range of substrates
• PE film face — soft and conformable, ideal for squeezable bottles and curved surfaces

FAQ

Would the 62g White Glassine liner on F27501 (80μm Clear PE Film, General-purpose) change how it grips HDPE bottles and closures, and how do we check that before a full run?

80μm Clear PE Film is specified for the hdpe bottles field, which does not mean every substrate in it. PE film is soft and conforms to squeezable and curved bottles. Where the surface is recycled or carries mould release, treat the first roll as a trial.

F27501 (80μm Clear PE Film, General-purpose) in a 60 °C plant: what application window should we plan for, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

For F27501 (80μm Clear PE Film), what tack and peel should we expect from General-purpose adhesive at 23 °C, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Is F27501 (80μm Clear PE Film) kept in stock, or is it produced to order with General-purpose adhesive, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick F27501 (80μm Clear PE Film) over B373T0, and which holds better at the edge?

F27501 runs General-purpose adhesive on 62g White Glassine Liner, while B373T0 runs Standard on 30μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.