85μm Bright White PE Film HDPE Bottles Label Material — F38T40

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• PE film face — soft and conformable, ideal for squeezable bottles and curved surfaces
• Verified by customer mass production

FAQ

F38T40 (85μm Bright White PE Film): does the Low-odor / Residue-free adhesive on 30μm Clear PET give enough grab at the HDPE bottles and closures edge, and what would you send as a sample?

85μm Bright White PE Film is specified for the hdpe bottles field, which does not mean every substrate in it. PE film is soft and conforms to squeezable and curved bottles. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Can F38T40 (85μm Bright White PE Film, Low-odor / Residue-free) be applied at 60 °C on the line, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

How much tack does F38T40 (85μm Bright White PE Film) have with Low-odor / Residue-free adhesive, measured to which standard, and does the liner change the figure?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Does the 30μm Clear PET liner add lead time to a F38T40 (85μm Bright White PE Film, Low-odor / Residue-free) order, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does F38T40 (85μm Bright White PE Film) compare with B373T0 on HDPE bottles and closures, and which holds better at the edge?

F38T40 runs Low-odor / Residue-free adhesive on 30μm Clear PET Liner, while B373T0 runs Standard on 30μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.