85μm Bright White PE Film Detergent & Daily Chemical Bottles Label Material — F3AG61

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• PE film face — soft and conformable, ideal for squeezable bottles and curved surfaces

FAQ

Where does F3AG61 (85μm Bright White PE Film, All-weather Low-temperature) fail first on HDPE and squeezable detergent bottles, and does it still hold on our own substrate?

85μm Bright White PE Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. PE film is soft and conforms to squeezable and curved bottles. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does F3AG61 (85μm Bright White PE Film) survive 60 °C in service, given the All-weather Low-temperature adhesive, and does the liner shift it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Can you give tack and peel for F3AG61 (85μm Bright White PE Film, All-weather Low-temperature) in N rather than a vague high-tack claim, and how do we reproduce the test?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What quantity does F3AG61 (85μm Bright White PE Film, All-weather Low-temperature) start at on a 62g White Glassine liner, and does a trial roll count, and can a trial roll count towards it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does F3AG61 (85μm Bright White PE Film) compare with B373T0 on HDPE and squeezable detergent bottles, and which one should we trial first?

F3AG61 runs All-weather Low-temperature adhesive on 62g White Glassine Liner, while B373T0 runs Standard on 30μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.