100μm Bright White PE Film HDPE Bottles Label Material — F3W901

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• PE film face — soft and conformable, ideal for squeezable bottles and curved surfaces

FAQ

We print 100μm Bright White PE Film on 62g White Glassine — will that hold on HDPE bottles and closures, and does the liner change the answer?

100μm Bright White PE Film is specified for the hdpe bottles field, which does not mean every substrate in it. PE film is soft and conforms to squeezable and curved bottles. Where the surface is recycled or carries mould release, treat the first roll as a trial.

How cold can the line run before the Wash-off adhesive on F3W901 (100μm Bright White PE Film) stops grabbing, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What are the initial tack and 90° peel figures for F3W901 (100μm Bright White PE Film, Wash-off), and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Do we have to take a full production lot of F3W901 (100μm Bright White PE Film), or can Wash-off codes be pooled, and does a slit roll change it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is B373T0 a drop-in alternative to F3W901 (100μm Bright White PE Film), and which holds better at the edge?

F3W901 runs Wash-off adhesive on 62g White Glassine Liner, while B373T0 runs Standard on 30μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.