80μm PP Film Infusion & Medical Label Material — F80681

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

What substrates is F80681 (80μm PP Film) built for, given it runs a Standard adhesive, and does the liner change the answer?

80μm PP Film is specified for the infusion & medical field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

We fill at 60 °C — will F80681 (80μm PP Film, Standard) still wet out, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

How much tack does F80681 (80μm PP Film) have with Standard adhesive, measured to which standard, and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What is the smallest order you will accept for F80681 (80μm PP Film, Standard) on Double-layer White Glassine, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is F10050 a drop-in alternative to F80681 (80μm PP Film), and which holds better at the edge?

F80681 runs Standard adhesive on Double-layer White Glassine Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.