75μm Synthetic Paper Removable & No-Residue Label Material — F8RG30

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

What does F8RG30 (75μm Synthetic Paper, Removable) on a 60g White Glassine liner need on glass, furniture and reusable containers: primer, corona, or nothing, and does the liner change the answer?

75μm Synthetic Paper is specified for the removable & no-residue field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What happens to F8RG30 (75μm Synthetic Paper) below 60 °C with this Removable adhesive, and is there a written figure for it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Do the peel figures for F8RG30 (75μm Synthetic Paper, Removable) change with the 60g White Glassine liner, and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

How many square metres of F8RG30 in 75μm Synthetic Paper makes a minimum run, and does a slit roll change it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick F8RG30 (75μm Synthetic Paper) over F10050, and which one should we trial first?

F8RG30 runs Removable adhesive on 60g White Glassine Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.