80g Premium Coated Paper Pharmaceutical Containers Label Material — A159T0

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Medium-tack adhesive system — balanced adhesion and converting performance
• Coated paper face — excellent print reproduction for fine graphics

FAQ

What does A159T0 (80g Premium Coated Paper, Medium-tack) on a 30μm Clear PET liner need on small-diameter vials and ampoule cartons: primer, corona, or nothing, and what would you send as a sample?

80g Premium Coated Paper is specified for the pharmaceutical containers field, which does not mean every substrate in it. Coated paper takes fine print and varnish well, and it takes up moisture at the cut edge. Where the surface is recycled or carries mould release, treat the first roll as a trial.

We fill at 60 °C — will A159T0 (80g Premium Coated Paper, Medium-tack) still wet out, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What do the 80g Premium Coated Paper and Medium-tack combination report for tack and peel, and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

How many square metres of A159T0 in 80g Premium Coated Paper makes a minimum run, and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

We used AR0011 before. What changes if we switch to A159T0 (80g Premium Coated Paper), and which one should we trial first?

A159T0 runs Medium-tack adhesive on 30μm Clear PET Liner, while AR0011 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.