80g Coated Paper General Standard Label Material — ACMG50

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Hot melt adhesive system — good heat resistance for demanding environments
• Coated paper face — excellent print reproduction for fine graphics

FAQ

What does ACMG50 (80g Coated Paper, Hot Melt) on a 58g Yellow Glassine liner need on general cartons and rigid containers: primer, corona, or nothing, and how do we check that before a full run?

80g Coated Paper is specified for the general standard field, which does not mean every substrate in it. Coated paper takes fine print and varnish well, and it takes up moisture at the cut edge. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does ACMG50 (80g Coated Paper, Hot Melt) on 58g Yellow Glassine hold its service range after a week at 60 °C, and does that hold at our line temperature?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Which standard are the tack and peel values for 80g Coated Paper on 58g Yellow Glassine reported to, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Do we have to take a full production lot of ACMG50 (80g Coated Paper), or can Hot Melt codes be pooled, and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is AR0011 a drop-in alternative to ACMG50 (80g Coated Paper), and which one should we trial first?

ACMG50 runs Hot Melt adhesive on 58g Yellow Glassine Liner, while AR0011 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.