80g Coated Paper Industrial Rough Surfaces Label Material — AJ6001

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Hot melt adhesive system — good heat resistance for demanding environments
• Coated paper face — excellent print reproduction for fine graphics

FAQ

AJ6001 (80g Coated Paper): does the Hot Melt adhesive on 62g White Glassine give enough grab at the rough, dusty or low-energy parts edge, and how do we check that before a full run?

80g Coated Paper is specified for the industrial rough surfaces field, which does not mean every substrate in it. Coated paper takes fine print and varnish well, and it takes up moisture at the cut edge. Not recommended for PVC surfaces; small diameters, irregular or squeezable bottles.

AJ6001 (80g Coated Paper, Hot Melt) in a 60 °C plant: what application window should we plan for, and does the liner shift it?

The minimum application temperature is 10 °C and the service range after labelling is -15–65 °C. Below the minimum the adhesive cannot wet out, and edges lift within hours on a curved wall. Both figures are measured at 23±2 °C / 50±5 % RH, so confirm them with a trial roll on your line.

What are the initial tack and 90° peel figures for AJ6001 (80g Coated Paper, Hot Melt), and what substrate was it measured on?

Initial tack is ≥17 N by the ball method and 90° peel is ≥9 N/25 mm after 20 min. Both are measured to FINAT FTM 9 and FTM 2 at 23±2 °C / 50±5 % RH. Peel grows with dwell, so compare the same hold time against your own pull test.

How many square metres of AJ6001 in 80g Coated Paper makes a minimum run, and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between AJ6001 (80g Coated Paper) and AR0011, and is one a drop-in for the other?

AJ6001 runs Hot Melt adhesive on 62g White Glassine Liner, while AR0011 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.