What are the three most common failure modes for Office & Stationery labels?

Three failures repeat on paper, card and file folders: an uncoated face feathers when written on with a wet pen; a laser fuser runs at 180–200 °C and a soft adhesive oozes at the edge; sheets curl when the liner and face are unbalanced.

For Office & Stationery, which face and adhesive does the catalogue actually use?

In this field the catalogue concentrates on Woodfree Paper, PP Film: 20 of the 20 constructions here use one of those faces, and Hot Melt is the most frequent adhesive. That pairing is chosen for pen and laser fusing at 180–200 °C.

Do Office & Stationery shipments include a TDS and a lot number?

Each lot ships with a TDS for the construction and a lot number on the reel label. We also issue a written statement of the adhesive chemistry so your own REACH or FDA assessment can be completed. For food contact we can declare the face and adhesive only, not your printing ink.

How is Office & Stationery material wound and packed?

Jumbo roll or slit roll, wound to your core and width, in 500 ㎡ lots. We do not publish a single line-speed figure, because release force depends on your die, web tension and dwell. Send your m/min and we cut a trial roll to match.

What is the minimum order quantity for Office & Stationery?

The catalogue MOQ is 500 ㎡ per construction; below that a coating run is not economic, so we quote a share of a scheduled run instead. Lead time is 15 days after artwork and roll-format approval, ex-works Guangzhou. It can be consolidated with other codes on the same shipment.

Can we get a trial roll of Office & Stationery before ordering?

Send substrate, line speed and roll format in the brief; we shortlist two or three constructions, then cut a trial roll for approval on your own press. Production starts only after you sign off that trial, and inspection happens before dispatch.

Label Material for Office & Stationery — 20 Options

What usually decides the choice

For office & stationery the three variables that most often cause a complaint are substrate surface energy (whether the adhesive can wet out), temperature and moisture at application and in service, and line speed (whether the liner releases cleanly at your press speed). Selecting on face stock alone is where most specification errors start.

FAQ

What are the three most common failure modes for Office & Stationery labels?: Three failures repeat on paper, card and file folders: an uncoated face feathers when written on with a wet pen; a laser fuser runs at 180–200 °C and a soft adhesive oozes at the edge; sheets curl when the liner and face are unbalanced.
For Office & Stationery, which face and adhesive does the catalogue actually use?: In this field the catalogue concentrates on Woodfree Paper, PP Film: 20 of the 20 constructions here use one of those faces, and Hot Melt is the most frequent adhesive. That pairing is chosen for pen and laser fusing at 180–200 °C.
Do Office & Stationery shipments include a TDS and a lot number?: Each lot ships with a TDS for the construction and a lot number on the reel label. We also issue a written statement of the adhesive chemistry so your own REACH or FDA assessment can be completed. For food contact we can declare the face and adhesive only, not your printing ink.
How is Office & Stationery material wound and packed?: Jumbo roll or slit roll, wound to your core and width, in 500 ㎡ lots. We do not publish a single line-speed figure, because release force depends on your die, web tension and dwell. Send your m/min and we cut a trial roll to match.
What is the minimum order quantity for Office & Stationery?: The catalogue MOQ is 500 ㎡ per construction; below that a coating run is not economic, so we quote a share of a scheduled run instead. Lead time is 15 days after artwork and roll-format approval, ex-works Guangzhou. It can be consolidated with other codes on the same shipment.
Can we get a trial roll of Office & Stationery before ordering?: Send substrate, line speed and roll format in the brief; we shortlist two or three constructions, then cut a trial roll for approval on your own press. Production starts only after you sign off that trial, and inspection happens before dispatch.

Label Material for Office & Stationery

Constructions forOffice & Stationery

What usually decides the choice

FAQ

Send us your office & stationery label brief